The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
Sepiolite fibers are incorporated in a simple and practical method to achieve increased tensile strength characteristics and shape fixity ratios of polyurethane composites.
Marie-Claude Heuzey, Pierre J. Carreau, Davood Bagheriasl, Fatemeh Safdari , Musa R. Kamal, August 2016
Rheological, optical, mechanical, and thermomechanical investigation of the properties of cellulose-nanofiber-reinforced polylactide demonstrates the solution method for achieving good fiber dispersion.
Caroline A. Murphy, Maurice N. Collins, August 2016
Fully biodegradable polylactic acid/microcrystalline cellulose composites, with surface-modified reinforcing cellulose, are suitable for 3D printing applications.
A comprehensive investigation involved the direct measurement of the thickness, free surface, and flow field of non-Newtonian fluids and polyacrylic acid solutions.
Maurizio Biso , Md-Jamal Uddin , Sung-Jin Cho, June 2016
Slurries prepared with optimized binders exhibit good rheological characteristics and are a cost-effective option for lithium-ion battery applications.
Hector S. Zamora-Lopez, Benjami-n M. Mari-n-Santibanez, Jose Perez-Gonzalez, June 2016
Rheo-particle image velocimetry and thermal imaging results show that frictional and viscous heating act synergistically to produce significant temperature increases when a melt is extruded under slip conditions.
Capillary Rheology has been around for many years. As technology moves on, this has opened doors to use the capillary rheometer as a base on which to build a sophisticated R&D platform to perform a wide range of other tests, which help rheologists and their colleagues. We look at extensional rheology, elasticity, pressure- volume-temperature (PVT), thermal conductivity (TC), sharkskin analysis and the effects of counter pressure measurements. Those are but a few of available options to lab managers who try to squeeze out extra capabilities from their budgets.
Hyunwoo Kim, Kurt A. Koppi, Robert Wrisley, Joseph Dooley, May 2016
Multilayer coextrusion is a process in which two or more polymers are extruded and joined together in a feedblock or die to form a single structure with multiple layers. This paper will discuss the effect of viscous encapsulation especially in a flow channel with a noncircular cross-section on layer re-arrangement and rheology of a coextruded structure.
Kurt A. Koppi, Christopher M. Thurber, Hyunwoo Kim, Joseph Dooley, May 2016
Parallel plate rheometry has been used to characterize the viscosity of multilayer polymer structures. It has been demonstrated that this technique is not a good substitute for performing such measurements using a coextrusion slit die rheometer. For the purpose of designing dies for producing multilayer structures, one needs good viscosity data that correctly represent the behavior of the intended structure under flow and for this reason, a coextrusion slit die rheometer is recommended.
Hyunwoo Kim, Laura Dietsche, Patrick C. Lee, Joseph Dooley, May 2016
This study shows the effect of viscoelasticity on the flow uniformity in a film die. Flow simulations were conducted on flat die geometries based on the rheology of different resins with different viscoelasticity characteristics. The results have shown that viscoelasticity can have a significant influence on flow uniformity and flow distribution becomes less uniform as the elasticity of the resins increases.
Fabian Verheyen, Ralf-Urs Giesen, Hans-Peter Heim, May 2016
The injection molding process of liquid silicone rubber (LSR) imposes high demands on the injection molding machines and the tools due to the low viscosity of silicone rubber. There is very little data which describes the rheo-logical behavior of LSR and its influencing factors across a range of shear rates. In this study, the rheological behaviors of different types of LSR were characterized using a high pressure capillary rheometer with an apparent shear rate that ranged from 350 to 4000 1/s. In order to identify the temperature-dependent behavior, the test temperatures were varied between 27 and 42 °C. The behavior of the material at a high pressure was evaluated by analyzing the pressure profile of each measurement. All types of LSR displays a low level of viscosity from approx. 150 to 30 Pa s. As the shear rate and temperature rise, the viscosity of LSR decreases by at least 25 %. Ad-ditionally, we discover that the viscosity of LSR-materials with the same shore hardness differ strongly depending on which producers had made the materials. It was able to be shown that LSR displays homogenous material behavior across a wide range of shear rates. The low viscosity of LSR makes it well-suited for applica-tions with complex structures, which require long flow paths in the injection molding process. If the viscosity sinks too low, the requirements for the tool construction increase, and, consequently, also the costs.
Xiang Gao, Avraam I. Isayev, Xiaoping Zhang, Jing Zhong, May 2016
Polycarbonate (PC)/carbon nanotubes (CNTs) composites were prepared using ultrasonic twin screw extruder at two different flow rates. During the extrusion of PC/CNTs composites, both the shearing and ultrasonic treatment helped dispersing CNTs into the polymer matrix. At low flow rate and longer residence time, CNTs can be well dispersed, but this may induce more degradation of polymer and low production throughput, which is not good for industrial production. At high flow rate, the dispersion of CNTs is worse than that in low flow rate and thus worse properties. Regarding to this problem, ultrasonic technology stands out and shows superior capability in improving the dispersion of CNTs and increase the throughput at the same time, which is especially beneficial for industrial production of polymer/nanofiller composites. The electrical, morphological, rheological and mechanical properties of the untreated and ultrasonically treated samples were investigated. The results supported the conclusion that ultrasonic technology is exceptionally efficient on improving the dispersion of CNTs and preparing welldispersed polymer composites at high flow rate.
Stéphane Costeux, Enrique Torres, Si-Wan Li, John M. Dealy, May 2016
The occurrence of strain hardening during extensional flow is known to be dependent on the molecular structure, in particular long-chain branching and molecular weight, based on studies on model polymer systems. However, commercial branched metallocene polyethylenes (BMPs) often present little or no strain hardening. The variety of molecular structures and distribution of molecular weight make it difficult to identify which species are needed for strain hardening to be observed in extension. We investigate a series of BMPs made by solution polymerization, in which the branching level vary in a systematic way, and in which only the most highly branched members of the series exhibit mild strain hardening. By use of polymerization and rheological models along with new data on the extensional flow behavior of the most highly-branched members of the set, we conclude that in spite of their very low concentration, tree-like molecules with branch-on-branch structures that provide a large number of deeply buried inner segments are essential for strain hardening in these polymers.
Rheological responses under elongational flow play a crucial role in processability of a molten polymer at various processing operations. Therefore, the elongational viscosity has been evaluated. In industry, instead of elongational viscosity, the drawdown force, defined as the force required to stretch a molten polymer, is often evaluated, which is sometimes called melt tension or melt strength. In general, the drawdown force measurement is performed at non-isothermal condition, as similar to actual processing operations. Therefore, crystallization and/or glassification processes affect the value. Here, we proposed several methods to enhance the drawdown force for polyolefins with linear structure, such as isotactic polypropylene (PP) and high-density polyethylene (HDPE), considering the crystallization behavior. The results indicated that the drawdown force increases with the die length in the wide range of draw ratios and shear rates at die. Furthermore, this phenomenon was pronounced for a melt having long relaxation time at low extrusion temperature. The mechanism of the drawdown force enhancement was found to be attributed to rapid crystallization owing to the reduction in the density of entanglement couplings after passing through a long die. In fact, marked molecular orientation was confirmed by 2D-XRD measurements. Furthermore, the drawdown force of PP was enhanced by the addition of a nucleating agent. Blending with other polymeric materials such as high-density polyethylene (HDPE) and poly(methyl methacrylate) (PMMA) having low viscosity is also effective to enhance the drawdown force.
Gregory A. Campbell, Michael E. Zak, Jayaprakash. S. Radhakrishnan, Mark D. Wetzel, May 2016
All polymer slurries that have a high concentration of filler are shear thinning. This can include the starting materials for sheet molding compound, polymer based inks, many reactive extrusions systems, and polymer concentrates that are let down in extrusion systems as color concentrates or opacifiers. Several sizes of calcium carbonate were initially investigated because of their extensive use in the polymer industry as fillers. The investigation focused on developing an analytical tool that would lead to understanding and the prediction of the flow characteristics of slurries that have a Newtonian continuous phase but have high enough filler concentration to exhibit shear thinning or power law characteristics. This work’s focuses on concentrations where the initial yield behavior is not dominant A new function was found that linearly correlates the power law constant, n, to the concentration of the filler. The behavior of this function suggests that the Newtonian to Power-law behavior may be dominated by percolation processes. We present here a theory that predicts the characteristic of the power law constant, n, as a function of filler concentration and is based on observing and modeling the well-known plug formation in the center of a tube as the material flows down the tube. The plug was experimentally shown to be a non-dissipating volume in the flowing slurry. This percolation based rheological analysis was then extended to a highly filled Polyethylene resin.
Peroxide induced controlled degradation of polypropylene has been well studied for commodity Ziegler-Natta based polypropylene (ZN-PP) resins and it is practiced industrially for producing resins of controlled rheological properties with accompanying narrower molecular weight distribution (MWD). In the present work, this technique was also tested on metallocene-based polypropylenes (mPP), possessing an initial narrow MWD. Kinetic model simulation results indicate that the polydispersity index (PDI) of the mPP remains almost unchanged while reducing molecular weight (MW) with increased peroxide concentration. Based on this observation, experiments were carried out to demonstrate the possibility of producing controlled rheology polypropylenes (CRPP) having targeted weight-average MW but varying PDI from different commodity resins of mPP or ZN-PP type.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
Access Your On-Demand Recorded Presentations and Papers
Presentations are available to all registrants of SPE Automotive TPO® 2025. NOTE: For those who registered, login to access presentations is required: SPE member login or non-member account login. If you've forgotten or misplaced your login information, please RESET YOUR PASSWORD. To reset your password, you will need your username/email address.
How to Search for Papers
On the Desktop, use the Ctrl+F (Windows)/Cmd+F(MacOS) to search the page. On Android, click ⁝ (Vertical Ellipsis) on the mobile browser and select “Find in page”. On iPhone, Safari and MS Edge, click share icon, and select Find in page. On Chrome and Firefox, click on ellipsis (Chrome) or hamburger menu (Firefox) and select Find in page.
Warning
The presentation videos will keep playing even when you close the popup. To stop the video from playing in the background, open the last speaker's pop-up where the video is playing and stop the video.
